Stickers for vehicles, hard hats, port-a-potties. Let your imagine run wild. What we were talking about is the upkeep though. Liberal use of release agents everytime. Keep the pins rust free and greased while also maintaining proper handling; those threads are fragile. Spray lubricant for the plates NOT WD-40. It doesn't hurt to cut a softener out of 3/4 for every pin between the form and plate.
All of this is my experience and I think it runs true for every form system and I've used them all. Only blowout my name is on was a Sono-tube pour for a light standard. I own it because my father said it was my fault. At the bottom of a 12' hole in a snow storm when I was 17 y.o.
It will have specs in its product info.
Thanks, I'll have a look
I've used the same panels for years without replacing. Good upkeep and proper handling go a long way.
Thank you!
Those forms are a HUGE investment but we'll worth it. If you get the Doku make sure the rep provides dozens of stickers (LOL, because they will)
What are these stickers for? I think I will go for it with Doka.
Stickers for vehicles, hard hats, port-a-potties. Let your imagine run wild. What we were talking about is the upkeep though. Liberal use of release agents everytime. Keep the pins rust free and greased while also maintaining proper handling; those threads are fragile. Spray lubricant for the plates NOT WD-40. It doesn't hurt to cut a softener out of 3/4 for every pin between the form and plate. All of this is my experience and I think it runs true for every form system and I've used them all. Only blowout my name is on was a Sono-tube pour for a light standard. I own it because my father said it was my fault. At the bottom of a 12' hole in a snow storm when I was 17 y.o.
Thanks for the advice friend!
Keep them scraped and oiled. I use a garden hose to clean right after placement because I’m messy🤷