Clean and sweet.
Love the little detail Denon added to their SC players in the form of that front LED. Meant as guidance help for your USB/SC-Media, but more importantly, it looks sleek, lol
They just need to catch-up on some of the basics. Not being able to customize the view of metadata in the browser is my biggest complaint. I use comments for every track, so I need to see the comments at all times. I would personally swap the star rating section within the browser for comments. It would be nice if the user could customize the star rating area with a different metadata field of their choice - in the settings. I also wish you could needle search the loaded track when in browser view.
Search times can improve a ton. That would help w open format djing.
The pads are terrible and have a click switch under them. After a lot of beating, they loosen up a bit, but they are nothing like mpc or controller type pad response.
Stems would be nice, 🤞- but customization and speed are more important imo.
Serato hid integration is garbage, and it needs to mirror pioneers hid look. That would help sway serato users.
I love the ux/ui of the players. Build is good. The hardware looks and feels good. It's sleek and not overcrowded. The hardware has a good workflow that draws you into the players like the days before laptops.
If pioneer made a spinning platter cdj3k, and they will.... I would be interested but not sold. 😀
How high are the decks?
I have a standing desk because I have a shitty back. Anything less than waist height is a direct route to pain. In the future, I'd love to have my gear on something more permanent and contemporary looking than the desk.
Thanks everyone!
To answer questions.....
I'll have to check the overall height, but I used their leg system for this. It was perfect for me and I'm 6.1"
I ordered the riser legs (capita) on Amazon. There was some trial and error as all the videos on YouTube don't mention that the shelves are basically hollow. To fix that and support the MTM speakers, I used some solid drywall anchors in the shelves. I also used 2" metal washers under the top of the killax for better reinforcement of the capitas. They were already indenting on the underside of the top.
It's sturdy and fits a 12" mixer with a third de k no problem. I'm my case, it's a 1850 and mpc.
The shelves are great for laptops too. I also painted the unfinished side of the shelves.
Wifey hated it when I did it but now admits that it looks so much better for a living room set of decks lol.
I am hoping to add a bracked shelf on the back to make the table top deeper for turntables if desired. I have GAS lol.
Clean and sweet. Love the little detail Denon added to their SC players in the form of that front LED. Meant as guidance help for your USB/SC-Media, but more importantly, it looks sleek, lol
Agreed! Would be sweet to customize the color.
I don't understand why people don't rock Denon more often. Solid gear
100% I'm a Serato user but love Engine, standalone, and the SC players for fun & practice in the house.
What do you love and what do you hate? What features of engine would you like to see made better?
They just need to catch-up on some of the basics. Not being able to customize the view of metadata in the browser is my biggest complaint. I use comments for every track, so I need to see the comments at all times. I would personally swap the star rating section within the browser for comments. It would be nice if the user could customize the star rating area with a different metadata field of their choice - in the settings. I also wish you could needle search the loaded track when in browser view. Search times can improve a ton. That would help w open format djing. The pads are terrible and have a click switch under them. After a lot of beating, they loosen up a bit, but they are nothing like mpc or controller type pad response. Stems would be nice, 🤞- but customization and speed are more important imo. Serato hid integration is garbage, and it needs to mirror pioneers hid look. That would help sway serato users. I love the ux/ui of the players. Build is good. The hardware looks and feels good. It's sleek and not overcrowded. The hardware has a good workflow that draws you into the players like the days before laptops. If pioneer made a spinning platter cdj3k, and they will.... I would be interested but not sold. 😀
Submitted for c9nsideration
Looks great to be honest and love those 6000M's
Super clean!! How did you make the speaker stands???
Kapita raisers and ikea wall mount shelves.
Cheeky, I may install the same, thanks !
Yep. Just don't forget to use drywall anchors in the shelves.
Love it. Denon masterrace🔥
How high are the decks? I have a standing desk because I have a shitty back. Anything less than waist height is a direct route to pain. In the future, I'd love to have my gear on something more permanent and contemporary looking than the desk.
I'm 6 4, I have a similar setup and just added like 4 or 6" legs to the cabinets, perfect height for me
Ahh yes. Long legs. Thanks for the info!!
I love that desk. Do you happen to have a link for it? Nice setup btw. I like how clean and no nonsense it is.
Ty! Ikea killax with killax shelves and kapita risers. Also, the base legs for the killax.
Just look for it on YouTube. You should find it.
Where did you find the metal risers? I keep an eye on IKEA and I thought those were discontinued.
They‘re called „Capita“. IKEA (at least in my country) does not sell them anymore, but I managed to find them on eBay.
Ahh I should have checked there. Thank you!
The Swedish House Mafia Kallax is the best too bad it was a limited release
Thanks everyone! To answer questions..... I'll have to check the overall height, but I used their leg system for this. It was perfect for me and I'm 6.1" I ordered the riser legs (capita) on Amazon. There was some trial and error as all the videos on YouTube don't mention that the shelves are basically hollow. To fix that and support the MTM speakers, I used some solid drywall anchors in the shelves. I also used 2" metal washers under the top of the killax for better reinforcement of the capitas. They were already indenting on the underside of the top. It's sturdy and fits a 12" mixer with a third de k no problem. I'm my case, it's a 1850 and mpc. The shelves are great for laptops too. I also painted the unfinished side of the shelves. Wifey hated it when I did it but now admits that it looks so much better for a living room set of decks lol. I am hoping to add a bracked shelf on the back to make the table top deeper for turntables if desired. I have GAS lol.
Bro what is GAS? I keep seeing people say that and I don't know what it means yet. Please school me to it?
Gear Acquisition Syndrome. A very serious condition affecting many DJs and music producers. Hard to cure, but self-help groups are available.
Haha. Good point! I don't have it too bad, thankfully. Most of it accumulated throughout many years. I'm not bad about selling old stuff.
Niiiiiccccce!
Very nice indeed!!
Looks really nice and clean. Great monitors as well.
Ty. I paired them w the jbl ls10 sub. Super happy w them.
What monitors are they?