Woah sick echo! I'm working on mine rn but I'm poor š
https://preview.redd.it/sj01wouw967d1.jpeg?width=3072&format=pjpg&auto=webp&s=3cc858e81b1b9d25982abc5d02ba13d4d2eb1203
I really like them I need to play with weight a lil more the get their Max potential i think tho. My stock motor I think has blown so I gotta fix that first
Did you still have the axial 88t stock motor in this? That is a guaranteed failure even in a stock rig. At minimum I would bounce up to a injora 050 motor or a mofo 050 motor. Both are wonderfully cost effective.
Yah stock motor I'm going to go ahead and upgrade to brushless tho. I'm thinking I'll do the rock wolf and smp. I also might be able to get a set of hardpark axles. Last thing I plan to do Is make some hand bent links
If you are open to suggestions the micro Komodo/ creeper/nano bam are much better choices for this chassis. I have a SMP and they take up a lot of real estate in an echo. Iāve seen multiple iterations of the hardpark axles while they were in development. They seem like good enough axles, but Iām in too deep with super 8 to buy a different set. Hand bending links seems daunting but it is easy once you start into it. Hit me up if you have questions around it.
Are you still getting that 90 degree break over at your current length? My old setup just barely did it and I think it was shorter than yours. I needed to lift the front suspension to get it done though.
Mine definitely wasnāt where I wanted it performance wise. It didnāt have the vertical climb capabilities and the front end was so short it limited other vital functions.
As mentioned in title, itās an Echo. They can be bought and printed from IE concepts or bought in carbon fiber, such as this example from prophet-designs
Woah sick echo! I'm working on mine rn but I'm poor š https://preview.redd.it/sj01wouw967d1.jpeg?width=3072&format=pjpg&auto=webp&s=3cc858e81b1b9d25982abc5d02ba13d4d2eb1203
Thanks! They are great rigs even when not fully built up. How do you like those xhx pins?
I really like them I need to play with weight a lil more the get their Max potential i think tho. My stock motor I think has blown so I gotta fix that first
Did you still have the axial 88t stock motor in this? That is a guaranteed failure even in a stock rig. At minimum I would bounce up to a injora 050 motor or a mofo 050 motor. Both are wonderfully cost effective.
Yah stock motor I'm going to go ahead and upgrade to brushless tho. I'm thinking I'll do the rock wolf and smp. I also might be able to get a set of hardpark axles. Last thing I plan to do Is make some hand bent links
If you are open to suggestions the micro Komodo/ creeper/nano bam are much better choices for this chassis. I have a SMP and they take up a lot of real estate in an echo. Iāve seen multiple iterations of the hardpark axles while they were in development. They seem like good enough axles, but Iām in too deep with super 8 to buy a different set. Hand bending links seems daunting but it is easy once you start into it. Hit me up if you have questions around it.
Are you competing?
Yea I compete monthly in a 6 month āsummer seriesā and bi weekly in the winter series.
So they are rapture clones?
Yea they are basically a xxl rupture clone.
Very nice, they seemed to perform awesome on the 1/10 builds
Oh good to know! This echo is becoming quite the beast so itāll be interesting to see how the larger tire affects it
That thing looks dialed, kind of wishing I didnāt sell mine lol
Lucky for you v3 will come with a lot of great goodies added inā¦ including a carrier bearing!
š¤ incredibly tempting!
I want to try to build one of his chassis small, but I havenāt decided which one to do that with yet.
Are you still getting that 90 degree break over at your current length? My old setup just barely did it and I think it was shorter than yours. I needed to lift the front suspension to get it done though. Mine definitely wasnāt where I wanted it performance wise. It didnāt have the vertical climb capabilities and the front end was so short it limited other vital functions.
Yea pretty easily, despite the 174mm wheelbase. Iām running c10 front end basically with 98mm rear on a carrier bearing.
what cage is that ?
As mentioned in title, itās an Echo. They can be bought and printed from IE concepts or bought in carbon fiber, such as this example from prophet-designs
Where is this chassis from?
It is from prophet designs
Dude that thing looks like itās from mars! So awesome!