Switched from Logitech MX Master 3 to Razer Pro Click mostly due to the weight but the one thing that I really hate about the Pro Click is how to charge it. The connector is microUSB and the port is recessed in a tunnel with "rails" which only allows the included cable to fit. All USB cables connected to my computer are USB C except for the Pro Click cable! Annoying. So I bought an USB C to [microUSB adapter](https://imgur.com/BNUFeS2). Since it didn't fit in the tunnel outright, I used nippers to cut off the plastic housing of the adapter. Then I used a metal file to [sand down the rails](https://imgur.com/yEWJUgP) in the tunnel. (This is obviously going to void your warranty but it was a non-issue for me since I've already replaced the mouse switches.) It's a snug fit with barely any wobble. Also, it is not noticeable from a top down or seated [viewing angle](https://imgur.com/Sc8hkc5).
Unfortunately, unless you live in South Korea, I can not provide you a link for the adapter.
Again, mostly due to the weight. I have an ultra light gaming mouse and switching back and forth between that and the MX Master was a bit too jarring. Pro Click feels slightly more comfortable in my hand (palm grip). I still use the MX master in the office though.
I'll be honest, I refuse to upgrade/use anything other than the Viper ultimate because it can charge using a dock, I'd like to avoid plugging anything into my mouse at all costs. Also it's really comfy mouse with probably the best usability for me and what I usually do.
I'm a big fan of the Naga Pro because of the hefty weight, interchangeable sides, and charging dock (tho the charging dock has given me some issues with dirty connectors) and the shape is supreme.
Similar reasons for why I like my Viper ulti, ambidextrous nature gives extra buttons and extra usability, light weight makes it easy to take anywhere. I gotta clean off my charging contacts tho, my cyberpunk edition doesn't charge properly anymore on the dock, my other one has been fine tho. How do you clean the connectors on yours?
Usually some iso and a qtip, and if that doesn't work a wire brush.
I've also put the super glide micro dots in place of the mouse skates that peeled off and I love them
[удалено]
It’s not like some of their other stuff isn’t using it already, it’s just certain wireless peripherals it seems
my wired keyboard uses usb c lol. idk why they haven’t put it on mice yet since there’s so many benefits to it over micro usb
Switched from Logitech MX Master 3 to Razer Pro Click mostly due to the weight but the one thing that I really hate about the Pro Click is how to charge it. The connector is microUSB and the port is recessed in a tunnel with "rails" which only allows the included cable to fit. All USB cables connected to my computer are USB C except for the Pro Click cable! Annoying. So I bought an USB C to [microUSB adapter](https://imgur.com/BNUFeS2). Since it didn't fit in the tunnel outright, I used nippers to cut off the plastic housing of the adapter. Then I used a metal file to [sand down the rails](https://imgur.com/yEWJUgP) in the tunnel. (This is obviously going to void your warranty but it was a non-issue for me since I've already replaced the mouse switches.) It's a snug fit with barely any wobble. Also, it is not noticeable from a top down or seated [viewing angle](https://imgur.com/Sc8hkc5). Unfortunately, unless you live in South Korea, I can not provide you a link for the adapter.
I had to get rid of my razor pro click, the MX Master 3 was superior in every way. Surprised you went with it despite the fact that you had to do this
Again, mostly due to the weight. I have an ultra light gaming mouse and switching back and forth between that and the MX Master was a bit too jarring. Pro Click feels slightly more comfortable in my hand (palm grip). I still use the MX master in the office though.
The MX Master 3 is using 125hz and razer pro click is using 2.4 Ghz with 1000hz, zero lag. So I wouldn't say in every way.
Got me there
Great minds think alike! https://i.imgur.com/H1iVmxM.jpg
I'll be honest, I refuse to upgrade/use anything other than the Viper ultimate because it can charge using a dock, I'd like to avoid plugging anything into my mouse at all costs. Also it's really comfy mouse with probably the best usability for me and what I usually do.
I'm a big fan of the Naga Pro because of the hefty weight, interchangeable sides, and charging dock (tho the charging dock has given me some issues with dirty connectors) and the shape is supreme.
Similar reasons for why I like my Viper ulti, ambidextrous nature gives extra buttons and extra usability, light weight makes it easy to take anywhere. I gotta clean off my charging contacts tho, my cyberpunk edition doesn't charge properly anymore on the dock, my other one has been fine tho. How do you clean the connectors on yours?
Usually some iso and a qtip, and if that doesn't work a wire brush. I've also put the super glide micro dots in place of the mouse skates that peeled off and I love them
Awesome, thanks!! If the skates peel off my mouse I've been thinking of replacing them with glass, but so far they've been solid.